Add Log Server

A log server can be used to collect management node logs, enabling quick issue identification and improving the operational efficiency of the platform.

• You must have admin permissions to configure the log server.
• Make sure the communication between the management node and the log server is properly established.
• Make sure the log server has syslog server installed.

1. In the navigation pane, choose System Management > Log Server.

2. On the Log Server page, click Add Log Server.

3. In the Add Log Server dialog, set the following parameters:

   • Name: Set the name of the log server.

   • Description: Optionally fill in a description for the log server.

   • IP Address: Enter the IP address of the log server.

   • UDP Port: Enter the port number that provides service for the UDP protocol.

   • Log Identifier: Select the log device category to match the log server, supporting LOCAL0~LOCAL7.

     The level must be consistent with the setting in the log server's rsyslog.conf file to properly receive log information.

4. (Optional) Click Test Connection to check the IP address connectivity.

5. Review the configuration and click OK.